USER MANUAL
19
DESOI GmbH | Gewerbestraße 16 | D-36148 Kalbach | Phone +49 6655 9636-0 | Fax +49 6655 9636-6666 | [email protected] |
www.desoi.de
5.0
Startup procedure
5.1
Safety instructions for the startup procedure
5.2
Switching positions of driving unit
5.3
Procedure / Preparation for commissioning
•
Checks after the commissioning
5.1 Safety instructions for the startup prodedure
NOTE!
•
The product may only be used with a FI (error protection switch 30 mA) or with a PRCP (personal safety switch) on
the supply grid.
•
Please note the processing times of the materials used. Material that is already hardened or that has undergone
a reaction can damage machine parts and accessories that come into contact with it.
•
The machine may at no time be started under full load. If the machine is started under full load, overload
protection is activated and the machine switches off promptly.
DANGER! Danger to life!
Improper installation and improper electrical connection can be life-threatening.
•
Observe accident prevention regulations!
CAUTION! unexpected, automatic start-up of the machine is possible!
Before connecting the power supply, the ball valve on the pneumatic control must be brought into the closed position. It
is only in this way that an automatic startup of the machine can be prevented.
HAZARD! due to discharging pressurised feed medium
Serious injuries may result from defective sealing elements or damage to necessary accessories.
•
The respectively required injection head should never be directed at yourself or others.
•
Eye protection, hand protection and suitable work clothes as well as work shoes must be worn!
•
Before each start-up, the fluid hose and the respective injection head must be inspected for wear, damage and
proper fit.
•
Maintenance intervals must be observed
WARNING! from getting caught or crushed between moving components
The resulting pumping movements may result in danger of jamming or crushing between moving components.
•
During a pump cycle, it must be ensured that no other person can intervene in the created danger area.
•
Only operate after the protective cover of the pneumatic control unit has been installed
CAUTION! Risk of injury due to improper body posture (postural problems)
A healthy posture must be maintained while carrying out any work on the machine.
•
In case of prolonged exposure, posture may need to be changed. (e.g. squatting and kneeling)
Harmful to health!
Contact with processing materials, cleaning agents or auxiliary lubricants can lead to hazards.
•
Protective clothing, protective gloves, safety shoes and goggles must be worn.
•
In case of contact, the affected area should be cleaned immediately.
•
Technical data sheets and safety data sheets of the manufacturer of the processing medium and the cleaning
agent must be observed and adhered to.
•
Please note the processing times of the materials used. Material that is already hardened or that has undergone a
reaction can damage any machine parts and accessories that come into contact with the material.
•
The consumption of foodstuffs is strictly prohibited in conjunction with feed materials, cleaning agents and
auxiliary lubricants.
ATTENTION!
Supply and connection lines (material hose) can become tripping hazards!
•
Lay material and supply lines in such a way that no additional source of danger emanates from them.