Finished slot.
Linkages
Locate the 2” linkage rods.
Using a T square perpendicular to trailing edge, posi-
tion the rod and mark the elevator for the control horn
position. Don
ʼ
t forget to allow for offset of the ball link.
Position horn to the outside of the ball link.
Position the control horn with hole over hinge line and
mark the length of the slot, again using the T square to
keep the line perpendicular to the hinge line.
Use T-square to align linkage with hinge line and mark.
With clevis hole on hinge line, mark fore and aft extents of control arm.
Construction Manual
Der Jet F9F-8 Cougar Page 9
