Control horn is glued in place. Use a liberal amount of V-poxy and make
a nice fillet. Make sure hinges are positioned identically side to side,
and that they are vertical in their slots. Remove tape before glue dries.
Wing is now finished. Dubro Heavy Duty ball links required when using
SWB arms to accommodate 4-40 bolt for arm.
Tape and V-poxy control arms in place. Make nice fil-
lets. When dry, touch up with matching paint.
Install linkages.
Carefully mark and cut slots in servo hatch covers for
the servo arms. Reattach hatches to wing.
Receiver and Batteries
Batteries are mounted on port side of nose structure.
Run battery wires back through the forward part of the
fuse to the mainboard, assuming this is the location of
your regulator and receiver.
Location of twin receiver batteries and ECU battery. Keep the batteries
in the nose to avoid the need to add ballast when determining CG.
Construction Manual
Der Jet F9F-8 Cougar Page 37
