6/32 bolt, which you are likely to have in your spare
parts.)
Gently work vertical fin into place. It should be a snug
fit. Secure with 12 mm bolt and large washer, using
Loctite. You will be working blind, but if you feel for
the hole with your finger, the bolt should slip into
place. Do not force the bolt and risk stripping the
threads.
Snug the main vertical stab spar mounting clamp
through the access hole on the left side of the fuse-
lage. Use a 3/32 allen wrench. Do not strip out the
head of the bolt.
Final check of rudder assembly.
Notch tail cone to clear metal U bracket and install.
Notch tail cone to clear metal U bracket.
Attach tail cone with small wood screws, two per side. These screws
were left over from the horizontal stabilizer cover plates, which were
attached with heavy duty button screws as outlined in the instructions.
Construction Manual
Der Jet F9F-8 Cougar Page 15
