DENTSPLY AEU-25T, Инструкция по эксплуатации и техническому обслуживанию

Страница: 7 / 20

5
During Calibration, the
handpiece will operate,
rotating through a pre-
programmed speed
range. Before calibrating,
be sure a file or bit is
secured in the handpiece
with the collet closed.
CAUTION
Chart 1 - Endo DTC
®
Default Presets
Preset Button 1 Default File Series:
DENTSPLY Tulsa Dental Specialties PathFile ® All Files
File #1: PathFile (All Files)
Preset Button 2 Default File Series:
DENTSPLY Tulsa Dental Specialties ProTaper Next™ Files
File #1: ProTaper Next High All
File #2: ProTaper Next Low All
Preset Button 3 Default File Series:
DENTSPLY Tulsa Dental Specialties ProTaper ® Universal Files
File #1: ProTaper Universal S1 & SX
File #2: ProTaper Universal S2 & F1
File #3: ProTaper Universal F2, F3, F4, F5
File #4: ProTaper Universal Retreatment D1 & D2
File #5: ProTaper Universal Retreatment D3
Preset Button 4 Default File Series:
DENTSPLY Tulsa Dental Specialties Vortex ® 04 & 06 Taper Files
File #1: Vortex Orifice (All)
File #2: Vortex 04, .35 through .50 taper
File #3: Vortex 04, .25 and .30 taper
File #4: Vortex 04, .15 and .20 taper
File #5: Vortex 06, .35 through .50 taper
File #6: Vortex 06, .25 and .30 taper
File #7: Vortex 06, .15 & 20 taper
Preset Button 5 Default File Series:
DENTSPLY Tulsa Dental Specialties GT ® Series 20, 30, 40 Files
File #1: Accessory 90, 70, 50, 35/.12 taper
File #2: GT Yellow 20 Series, .10 and .08 taper
File #3: GT Yellow 20 Series, .06 and .04 taper
File #4: GT Blue 30 Series, .10 and .08 taper
File #5: GT Blue 30 Series, .06 and .04 taper
File #6: GT Black 40 Series, .10 and .08 taper
File #7: GT Black 40 Series, .06 and .04 taper