Troubleshooting Guide for Installing Dension Products
50
E. Firmware update
Works the exactly same way as on other devices like
Gateway Lite BT
or
Gateway Pro
.
The actual firmware version can be checked if you have the GW_EES.BIN. Just view it using NotePad
(or similar application). If you click on view, you will see the following:
Do not forget:
-
file needs to be copied to the root folder on the USB drive
-
the drive
has at least one playable music content on it
-
use a USB drive instead of an HDD
-
do not disconnect the USB throughout the update process (max. 2 minutes)
-
do not turn the engine ON
while
updating (
it can be turned ON before or after
)
-
same firmware version cannot be updated onto the Gateway
G. Installation issues:
When
installing
a Gateway 500 Lite, please
do not forget (!):
-
Factory
CD-Changer
cannot
be retained
-
Programming required
if factory CD-Changer option was not set or there is no other device on
the optical ring
-
Wake up
wire needs to be connected properly – according to the manual
-
power needs to be constant/permanent 12V
