Troubleshooting Guide for Installing Dension Products
40
G. Installation/Programming issues
You can have the exactly same programming issues as with the Gateway 500 (GW51MO2) however,
do not forget, GW500S BT comes with a
phone option
which adds to the areas where issues can occur.
Please do not forget the following:
-
the Gateway 500S BT works on TEXT capable systems only
-
the phone needs to be programmed on BMW only (!)
. Luckily the phone works without any
additional programming procedure on Audi, Mercedes (right now only with EU spec. radio
where no END/SEND button is available) and Porsche
-
if the vehicle has factory phone
it needs to be removed
because the phone module of the
GW500S BT does not work as a standalone BT audio option, causing a conflict between the
Dension device and the factory phone.
We recommend the use of
Autologic
or another third party enabler (NCS expert for instance)
when
programming a BMW
. We do not recommend the use of the factory programmer since it can be
operated in manual programming mode only.
You can use the factory computer for all other brands.
H. Factory CD-Changer and phone locations
Phone:
Audi A6/A8 => below the carpet in front of the left side seat
Porsche => behind the right side seat
CD-Changer:
Mercedes S / SL => in the trunk
Porsche => in the trunk
