GEN2BME Enabler
47
PC requirements:
Software:
- 32-bit Microsoft Windows® XP (64-bit version is not supported)
- 32-bit Microsoft Windows® Vista (64-bit version is not supported)
- 32-bit Microsoft Windows® 7 (64-bit version is not supported)*
- 32-bit Microsoft Windows® 8 (64-bit version is not supported)*
A mini USB cable is required to connect the GEN Enabler to the PC (not included in the
package).
Please note:
the appropriate installation files have to be used for successful GEN recognition
via USB.
The GEN file needs to be sent to Dension support. It takes at least one working day to check
the contents and to decode the result of the programming.
Disclaimer
The GEN tool does not have all vehicle diagnostics and configuration functions available in the
professional diagnostics tools. It is meant to help Gateway installations only and to work on
the vast majority of BMW vehicles with MOST system.
Despite all efforts and several tests Dension and its authorized distributors and retailers
cannot guarantee that by using the GEN tool there is no need for a professional diagnostics
tool to enable the features on certain vehicles. The GEN tool can replace the enabling
functions of a professional diagnostics tool in many cases, but it does not replace the skills of
a professional installer.
If your car’s electrical system begins to behave erratically, please disconnect the GEN tool and
immediately remove the Gateway interface physically and have the car inspected by your
installer.
Dension and its authorized distributors and retailers are not liable for any
incidental consequential or indirect damages or loss and do not assume liability for any
diagnostic fees.
* It is possible to use the GEN software on 64 bit systems, however the installation requires sophisticated IT
knowledge, therefore 64-bit systems are not listed in this document. Please contact Dension for assistance on
how to make it work on those versions.
