5
ENGLISH
LINE
L
R
OUT
IN
OUT
1
1
2
IN
2
OPTICAL
DIGITAL
CONNECTOR
SYSTEM
LINE
L
R
OUT
IN
1
2
CONNECTOR
SYSTEM
1
2
CONNECTOR
SYSTEM
ANTENNA TERMINAL
AM
FM
COAX.
LOOP ANT.
75
LINE OUT
L
R
1
2
CONNECTOR
SYSTEM
LINE OUT
L
R
1
OUT
2
OPTICAL
DIGITAL
SIGNAL
GND
1
2
SYSTEM
CONNECTOR
L
R
SPEAKER SYSTEM
SPEAKER IMPEDANCE
4 16
CD
DVD/AUX
TUNER
PHONO
TAPE
MD
AUX-2
TAPE
MD
PB
REC
INPUTS
L
R
L
R
R
L
R
L
L
R
L
R
L
R
L
R
L
R
L
R
R
L
R
L
R
L
R
L
R
L
DVD
B
R
L
R
L
DIGITAL AUDIO
DIGITAL AUDIO
(R)
(L)
5 CONNECTIONS
2
When connecting, also refer to the manuals of the other components.
2
When connecting to the 201SA series, make the system connections shown by dotted lines on the diagram below.
2
The PMA-201SA is not equipped with connection cords. Use the connection cords included with the components you are
connecting to the PMA-201SA.
NOTE:
• To allow for heat dispersal, do
not place another component
or any other object directly on
top of the PMA-201SA.
NOTE:
• If noise is generated
when the ground wire is
connected, disconnect
the ground wire.
• When making system connections with the 201SA series, connect
the system cord to the PMA-201SA system connector (either 1 or 2).
Also interconnect the other system components in the same way.
(System connections are indicated by dotted lines on the diagram.)
• The 201SA series tuner (TU-201SA) is
equipped with a clock and timer
function, so be sure to connect it to a
wall power outlet to which power is
supplied constantly.
Speaker system
CD player
MD recorder
(DMD-201SA)
Cassette deck
(DRR-201SA)
CD player
(DCD-201SA)
NOTES:
• Do not plug the power cords into the power outlets until all connections have been completed.
• Check the left and right channels and be sure to interconnect them correctly (R to R, L to L).
• Plug in the power cords securely. Incomplete connections will result in noise.
• Do not clasp the connection cords together with the power cords or place them near other electric products. Doing so may
result in noise.
• The PHONO input jack is extremely sensitive. A booming sound may be produced from the speakers if the volume is turned
up when no turntable is connected.
• The sound of another component may be heard if no component is connected to the input jacks of the function selected
with the FUNCTION selector.
DVD player
Power cord
(for U.K. model)
Power plug
AC 230V, 50 Hz
(Plug into a power
outlet)
Power cord
(for U.K. model)
Power plug
AC 230V, 50 Hz
(Plug into a power
outlet)
Power cord
(for U.K. model)
Power plug
AC 230V, 50 Hz
(Plug into a power
outlet)
Power cord
(for U.K. model)
Power plug
AC 230V, 50 Hz
(Plug into a power
outlet)
Power cord
(for U.K. model)
Power plug
AC 230V, 50 Hz
(Plug into a power outlet)
Tuner
(TU-201SA)
Turntable
(with MM cartridge)
NOTE:
• This unit cannot be used with MC cartridges directly. Use a head
amplifier or a step-up transformer with MC cartridges.
