35
Getting started
Connections
Basic operations
Advanced Operations
Advanced operations
Troubleshooting
Explanation terms
Information
Specifications
Index
EnGlisH
[Notes concerning use of “Firmware Update” and
“Add New Feature”]
•
Do not turn off the power until updating or upgrading is completed.
•
Even with a broadband connection to the Internet, approximately
20 minutes is required for the updating/upgrading procedure to be
completed.
• Once updating/upgrade starts, normal operations on this unit cannot
be performed until updating/upgrading is completed.
• Furthermore, updating/upgrading the firmware may reset the backup
data for the parameters, etc. set for this unit.
•
If the update or upgrade fails, remove and re-insert the power cord.
“Update Retry” appears on the display and update restarts from
the point at which update failed. If the error continues despite this,
check the network environment.
•
Information regarding the “Firmware Update” function and “Add
New Feature” will be announced on the D&M Professional web site
each time related plans are defined.
•
When usable new firmware is released with “Firmware Update”
or “Add New Feature”, a notification message is displayed on
the menu screen. When you do not want to be notified, set
“Update Notification” (
v
page 31) and “Upgrade Notification”
(
v
page 31) to “Off”.
Setting the others [Other]
Language
Sets the language for display the menu
.
•
The factory language setting is “English”.
1
Press
[MENU]
.
Turns on the Menu settings mode and the Menu appears on
the display (
v
page 28 “Menu map”).
2
Use
ui
to select “Other” – “Language”, then press
[ENTER]
,
<
1
/
3
ENTER>
or
p
.
English
/
Deutsch
/
Français
/
Italiano
/
Spanish
See the illustration on the previous page for details of the buttons used for the operations on this page.
