20
EnGlisH
Automatically presetting FM stations
(Auto Preset)
•
This unit can be preset with a total of 99, FM broadcast stations.
•
Perform this operation when tuned to an FM broadcast station.
NOTE
Auto preset is not possible with AM broadcast stations.
1
Press
[SEARCH]
.
“Auto Preset” menu appears.
2
Use
ui
to select “Start”, then press
[ENTER]
,
<
1
/
3
ENTER>
or
p
.
“Searching” appears in the display, and the unit searches for
radio stations. When the search is complete, “Complete!!”
appears.
n
Canceling auto presetting
Press
[
2
]
.
NOTE
•
Broadcast stations whose antenna signal are weak cannot be preset
automatically. If you wish to preset such stations, tune them in
manually.
•
If number that was already assigned as a preset is selected, the old
preset information is overwritten with the new information.
n
Giving station names to preset channels
Names of up to 8 characters can be input.
1
Tune in the preset channel you want to name.
2
Press and hold
[TUNER PRESET]
.
The display switches to the station name input display.
3
Input the station name.
•
For character input, see page 38.
4
Press
[ENTER]
or
<
1
/
3
ENTER>
.
The characters you have input are entered.
•
To give names to other stations, repeat steps 1 to 4.
Tuning in radio stations
Connect the antenna beforehand (
v
page 6).
Listening to FM/AM broadcasts
1
Press
[TUNER]
to select the reception band.
The reception band is toggled as shown below each time
[TUNER]
is pressed.
FM
When listening to an FM broadcast.
AM
When listening to an AM broadcast.
•
The reception band can also be selected by pressing
<SOURCE>
(
v
page 9).
2
Tune in the desired broadcast station.
When a station is received, the
will light.
Auto tuning
To tune in automatically.
q
Press
[MODE]
, and “AUTO” lights in the display.
w
Press
[TUNING
d
]
or
[TUNING
f
]
to select the station you want
to hear.
Manual tuning
To tune in manually.
q
Press
[MODE]
, and “AUTO” goes out in the display.
w
Press
[TUNING
d
]
or
[TUNING
f
]
to select the station you want
to hear.
•
If the desired station cannot be tuned in with auto tuning, tune it in
manually.
•
When tuning in stations manually, press and hold
[TUNING
d
]
or
[TUNING
f
]
to change frequencies continuously.
• A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far
from the TV as possible.
n
To stop auto tuning
Press
[TUNING
d
]
or
[TUNING
f
]
.
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this manual
[FAVORITE]
[SEARCH]
[HOME]
[MODE]
uio
p
[ENTER]
[
2
]
[TUNER PRESET]
[MENU]
[TUNING
df
]
[NUMBER]
(0 – 9, +10)
[, –]
[TUNER]
<
1
/
3
ENTER>
ui
pi
<FAVORITE>
