25
EnGlisH
Getting started
ConnectionsConnections
Basic Operations
Basic operations
Advanced operations
Troubleshooting
Explanation terms
Information
Specifications
Index
USB memory device playback
You can playback music stored on a USB memory device using this
unit.
n
USB memory device
(
v
page 49)
Playing files stored on USB memory
devices
1
Connect the USB memory device to the USB port.
USB memory
device
2
Press
ON/STANDBY
to turn on power to the main
unit.
3
Press
[USB/iPod]
to switch the input source to
“USB/iPod”.
•
For details on selecting the input source using the unit buttons, see
“Selecting the input source using unit operations” (
v
page 9).
4
Press
ui
to select the file or folder, then press
[ENTER]
,
<
1
/
3
ENTER>
or
p
.
5
Press
ui
to select the file, then press
[ENTER]
,
<
1
/
3
ENTER>
,
p
or
[
1
/
3
]
.
Playback starts.
•
If the USB memory device is divided into multiple partitions, only the
top partition can be selected.
•
This unit is compatible with MP3 files conforming to “MPEG-1 Audio
Layer-3” standards.
•
D&M does not guarantee that all USB memory devices will operate
or receive power. When using a portable USB connection type HDD
of the kind to which an AC adapter can be connected to supply
power, use the AC adapter.
NOTE
•
USB memory devices will not work via a USB hub.
•
It is not possible to connect and use a computer via the USB port of
this unit using a USB cable.
•
Do not use an extension cable when connecting a USB memory
device. This may cause radio interference with other devices.
•
Note that D&M will accept no responsibility whatsoever for any
problems arising with the data on a USB memory device when using
this unit in conjunction with the USB memory device.
Removing the USB memory device
1
Press
ON/STANDBY
to set the standby mode.
2
Check that the communication indicator on the USB
memory device is not flashing, then pull out the USB
memory device.
NOTE
Do not remove the USB memory device from the unit when the USB
memory communication indicator is flashing. Doing so may damage
the USB memory device, or may corrupt the files recorded on the USB
memory device.
See the illustration on the previous page for details of the buttons used for the operations on this page.
iPod® playback
Disconnecting the iPod
1
Press
ON/STANDBY
to set the standby mode.
2
Disconnect the iPod from the USB port.
