Denon AVR-X1000, Руководство пользователя

Страница: 137 / 194

137
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
Bass
Set subwoofer and LFE signal range playback.
2
Subwoofer Mode
Select low range signals to be reproduced by subwoofer.
LFE (Default) : The low range signal of the channel set to “Small”
speaker size is added to the LFE signal output from the
subwoofer.
LFE+Main : The low range signal of all channels is added to the LFE
signal output from the subwoofer. This is usually the best
setting for most systems.
%
• “Subwoofer Mode” can be set when “Speaker Config.” – “Subwoofer”
(
v
page 134) is set to other than “No”.
• Play music or a movie source and select the mode offering the strongest
bass.
• If “Front” and “Center” for “Speaker Config.” (
v
page 134) are set to
“Large”, and “Subwoofer Mode” is set to “LFE”, no sound may be output
from the subwoofers, depending on the input signal or selected sound mode.
Select “LFE+Main” if you want the bass signals to always be produced from
the subwoofer.
2
LPF for LFE
Set LFE signal playback range. Set this when you want to change the
playback frequency (low pass filter point) of the subwoofer.
80Hz
/
90Hz
/
100Hz
/
110Hz
/
120Hz
(Default) /
150Hz
/
200Hz
/
250Hz