Denon AVR-X1000, Руководство пользователя

Страница: 135 / 194

135
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
Distances
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each
speaker.
2
Unit
Set the unit of distance.
Meters (Default)
Feet
2
Step
Set the minimum variable width of the distance.
0.1m (Default) / 0.01m
1ft
/
0.1ft
2
Set Defaults
The “Distances” settings are returned to the default settings.
2
Set the distance
0.00m
–
18.00m
/
0.0ft
–
60.0ft
%
• The speakers that can be selected differ depending on the “Speaker Config.”
(
v
page 134) settings.
• Default settings :
Front L / Front R / Center / Subwoofer : 3.60 m (12.0 ft)
Surround L / Surround R : 3.00 m (10.0 ft)
• Set the difference in the distance between the speakers to less than 6.00 m
(20.0 ft).
Levels
Set the volume of the test tone to be the same when it is output from
each speaker.
2
Test Tone Start
Output test tone. A test tone is output from the selected speaker.
While listening to the test tone, adjust the volume output from the
selected speaker.
–12.0dB – +12.0dB
(Default : 0.0dB)
%
• When “Levels” is adjusted, the adjusted values are set for all the sound
modes.
• When headphones are connected to the PHONES connector on this unit, you
cannot set “Levels”.
2
Set Defaults
The “Levels” settings are returned to the default settings.