Denon AVR-X1000, Руководство пользователя

Страница: 124 / 194

124
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
Input Select
Set the audio input mode and decode mode of each input source.
The input modes available for selection may vary depending on the input
source.
2
Input Mode
Set the audio input modes for the different input sources.
It is normally recommended to set the audio input mode to “Auto”.
Auto
(Default) : Automatically detect input signal and perform playback.
HDMI : Play only signals from HDMI input.
Digital : Play only signals from digital audio input.
Analog
: Play only signals from analog audio input.
%
• When digital signals are properly input, the
~
indicator lights on the display.
If the
~
indicator does not light, check “Input Assign” ( v page 121) and
the connections.
• If “HDMI Control” is set to “On” and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose input
source is “TV AUDIO” is fixed to ARC.
2
Decode Mode
Set the audio decode mode for input source.
Auto
(Default) : Detect type of digital audio input signal and decode and
play automatically.
PCM
: Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
%
• This item can be set for input sources for which “HDMI” or “DIGITAL” is
assigned at “Input Assign” (
v page 121).
• Normally set this mode to “Auto”. It is recommended to set “PCM” or “DTS”
when audio is missing at the beginning or a noise occurs.