Denon AVR-X1000, Руководство пользователя

Страница: 148 / 194

148
Appendix Settings Playback Connections Contents
Front panel Display Rear panel Index Remote
Tips
Tips
I want the volume not to become too loud by mistake.
• Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by
mistake (
v
page 114).
I want to keep the volume at the same level when I turn the power on.
• By default, the volume setting when power was previously set to standby is applied at next power on. To use a fixed volume level, set the volume level
at power on for “Volume Limit” in the menu (
v
page 114).
I want to have the subwoofer always output audio.
• Depending on the input signals and sound mode, the subwoofer may not output audio.
When “Subwoofer Mode” in the menu is set to “LFE+Main”, you can have the subwoofer always output audio ( v page 137).
I want to make human voices in the movies clearer.
• Use “Dialog Level” in the menu to adjust the level (
v
page 109).
I want to keep bass and clarity during playback at a lower volume level.
• Set “Dynamic EQ” in the menu to “On”. This setting corrects the frequency characteristics to allow you to enjoy clear sound without the bass being
lost even during playback at a lower volume level (
v
page 115).
I want to automatically adjust the volume level difference in content such as TV and movies.
• Set “Dynamic Volume” in the menu. Volume level changes (between quiet scenes and loud scenes) in TV shows or movies are automatically adjusted
to your desired level (
v
page 116).
I want to set the optimized listening environment after changing the configuration/position of the speakers or
changing a speaker to a new one.
• Perform Audyssey® Setup. This automatically makes the optimized speaker settings for the new listening environment (
v
page 125).