120
Appendix
Tips
Playback
Connections
Contents
Front panel
Display
Rear panel
Index
Remote
Settings
TV Format
Set the video signal format to be output for the TV you are using.
2
Format
PAL
(Default) : Select PAL output.
NTSC
: Select NTSC output.
%
•
“Format” can also be set by the following procedure. However, the menu
screen is not displayed.
1.
Press and hold the main unit’s TUNE + and STATUS for at least 3 seconds.
“V.Format:<PAL>” appears on the display.
2.
Use the main unit’s TUNER PRESET CH +, – and set the video signal format.
3.
Press the main unit’s STATUS to complete the setting.
NOTE
•
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Содержание AVR-X1000
Страница 194: ...D M Holdings Inc 3520 10210 20AD www denon com ...