Denon AVR-X1000, Руководство пользователя

Страница: 136 / 194

136
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
2
Set the crossover frequency
40Hz
/
60Hz
/
80Hz
(Default) /
90Hz
/
100Hz
/
110Hz
/
120Hz
/
150Hz
/
200Hz / 250Hz
%
• “Crossovers” can be set when the “Subwoofer Mode” ( v page 137)
setting is “LFE+Main”, or when you have a speaker that is set to “Small”.
• The default crossover frequency is “80Hz”, which will work best with the
widest variety of speakers. We recommend setting to a higher frequency that
the crossover frequency when small speakers are used. For example, set to
“250Hz” when the frequency range of the speakers is 250 Hz – 20 kHz.
• For speakers set to “Small”, low frequency content below the crossover
frequency is attenuated to the speakers and the low bass content is then
re-delivered to the subwoofer, or the front (L/R) speakers if they have been
set to Large.
• The speakers that can be set when “Individual” is selected differ depending
on to the “Subwoofer Mode” (
v page 137) setting.
• When “LFE” is selected, speakers set to “Small” at “Speaker Config.”
(
v page 134) can be set. If the speakers are set to “Large”, “Full Band” is
displayed and the setting cannot be made.
• When “LFE+Main” is selected, speakers can be set regardless of the
“Speaker Config.” (
v
page 134) setting.
Crossovers
Set in accordance with the lower limit frequency of the base frequencies
that can be played back through each speaker.
2
Speaker Select
Selects how to set the crossover frequency. See the speaker manual
for information concerning speaker crossover frequency.
All (Default) : Sets the same crossover frequency for all speakers.
Individual : Selects the crossover points for each speaker individually.