1
Warnings and Precautions
(Read completely through and understand before proceeding)
Each statement in this section is a WARNING
Before connecting and operating the Sapphire
®
Plus, read all safety instructions. When used properly and with
normal precautions, the Sapphire Plus is a safe and effective multi-purpose light system. However, the Sapphire
Plus is a source of high electrical voltage, intense light, and heat. This product must only be used as indicated in
this manual.
This device must be used by Dental professionals such as a Board Certified Dentist or Orthodontist. The
operator must have specific training in use of light curing systems, and must be familiar with the complete
instructions for use (especially all warnings, precautions and alerts).
Do not shine light from the tip on anything other than indicated use (restorative materials which cure using photo-
initiators). Shining light on combustible materials may CAUSE FIRE. Use only as directed. Maintain this practice
even when you believe the lamp is off and cannot come back on.
Before connecting the Sapphire Plus to the mains (the AC wall outlet), verify that the voltage to be applied is
within the range of that specified on the identification label on the backside of the instrument. If you have any
questions concerning the proper voltage, call the factory for clarification.
To avoid risk of electric shock, disconnect the power cord before opening the lamp access door. Never remove
the product cover. All repairs other than lamp and fuse replacement must be made by a factory authorized
representative. Lamp replacement and fuse replacement must be done by a qualified service technician or by
factory authorized representative. Do not touch or probe other electronic components inside the product. There
is a risk of electric shock, even when the unit is disconnected from the AC wall outlet.
Do not modify this device. It is unsafe and voids the warranty.
Do not simultaneously touch the Sapphire main unit and the patient, either directly or through your body.
The unit generates high intensity light. The light travels down the light cable (warming the cable) and come out
the end of the light guide. High-intensity light can be harmful to the eyes. When the system is in use, the patient,
operator, and assistant(s) must all wear protective eyewear. Caution should be used to avoid accidentally
starting the light outside of the mouth. To avoid possible injury, never look directly into the end of the light
guide or directly into the light output on the front panel (even with protective eyewear). Never shine the light
into the eyes. The provided Orange Safety Glasses must be worn at all times by Patient, Operator, and
Assitant(s) when using this device.
PRECAUTION: When not in use, immediately turn off the power switch at the back of the device. Remove the tip
from the end of the light guide handle. Remove the light guide from the light guide receptacle. This reduces risks
associated with the light coming on unexpectantly.
Never look into the light guide receptacle of the main Sapphire unit. Interlocks in the system are designed to
prevent light from coming out of the receptacle, but if the system fails, intense light could come out of
the receptacle.
2
