background image

16

WARNING: Do not perform single tooth whitening in bleaching mode, since the power setting could be too high 
and since the timers are designed for bleaching for longer periods associated with using the Whitening Crystal. 
Do not use tip sizes less than 12 mm for single tooth whitening.
WARNING: Do not direct the light on to unprotected gingiva or skin. Bleaching/Curing light will cause rapid rise 
in temperature, if the beam or a portion of the beam is directed on unprotected gingiva or skin. The reflective 
surface of teeth is less prone to this effect, but patient tissue should be monitored closely during exposure to 
the light. Only perform bleaching using the whitening crystal (Note: Single tooth bleaching is done in the curing 
mode as explained elsewhere). Excess light on unprotected gingiva or skin can blister gingiva or skin. Device 
must be used only by trained dental professionals. Apply the light for only as long is needed to achieve required 
bleaching, with appropriate interim checks of the condition of the mouth.
Bleaching is only to be done along with chemical agents and treatment described in the “Whitening Section” of 
this user’s guide.
Start the lamp by pressing the ACTIVATOR button on the handpiece or the START/STOP button on the control 
panel. Stop the lamp by pressing the ACTIVATOR button or START/STOP again.

Whitening Instructions

LumiSmile

®

 White in-office whitening is designed to comfortably and quickly whiten 

patients’ teeth. The combination of LumiSmile White desensitizing enhancer and 
LumiSmile White whitening gel reduces chairtime required for effective whitening 
compared to traditional chairside bleaching treatments. This kit contains enough 
material to whiten both the upper and lower arches of one patient. 
The LumiSmile White in-office whitening kit is for in-office use only.
Store at or below 75º. Do Not freeze.

WARNINGS:
•  Product contains both strong oxidizing and alkaline agents and can cause chemical burns. Wear 

protective gloves and eyewear during preparation and application.

•   Avoid contacting soft gingival tissue with both the desensitizing enhancer and whitening gel. Using the  

Paint-On Dental Dam included in the kit will shield gingival tissue from these materials. Vacuum LumiSmile 
White whitening gel off teeth as instructed before rinsing with water to prevent splattering. Should gel 
come in contact with soft tissues, rinse thoroughly to dilute.

• Material is not for injection.
• Keep out of the reach of children.

13

Содержание Sapphire plus

























Отзывы: