background image

19

Bleach (Whitening) Mode

After the system power is switched ON ( I ), use the RIGHT arrow key to advance to the BLEACH mode. Or, if 
in the CURE mode, disconnect the light guide to reset the system. Use the RIGHT arrow key to advance to the 
BLEACH mode.

The indicator light next to BLEACH on the control panel will turn on. The display windows will show “Pr Hi” 
(power high). Use the DOWN arrow key to adjust power down in 5% increments.
Use the RIGHT arrow key to change to the bleach timer. The default timer is 60 minutes. The timer can be 
adjusted by using the UP and DOWN arrow keys on the CONTROL WHEEL.
To adjust the power output, press the DOWN arrow key on the CONTROL WHEEL to reduce the power and the 
UP arrow key on the CONTROL WHEEL to increase power. 
WARNING: High power is ONLY used with the Whitening Crystal. 
Note: Single Tooth whitening can also be done. Do this in the Curing Mode, using 5 seconds per tooth or less. 
Also ONLY use a 12 mm tip following all Indicated Warnings and Precautions.

start the system. After the timing cycle is completed and the light turns off, test the bottom surface for  
hardness using a dental probe. If the material is not completely cured, restart the system again for another 
5-second exposure. Test, and repeat again, if necessary. This will give you an indication of the optimum timing 
increment for the specific restorative to be used. Select a new timer increment which is close to the total time  
it took to cure the material. Repeat the test and verify that complete curing has occurred. If curing time is longer 
than 5 seconds, it is recommended that you repeat an additional 5-second exposure. It is important that you 
maintain a log of composite materials, shades, and associated curing times. This log can also be used to monitor 
system performance.
See Warnings and Precautions above with regard to curing for longer than 5 seconds.
If the cavity preparation is deep, an incremental filling technique is recommended and each increment should be 
cured following the manufacturer’s guidelines or your own experience with the restorative being used. 

BLEACH

Bleach 60 minutes

Power High

12

Содержание Sapphire plus

























Отзывы: