ELP AM Series - Manual 2011 - 042011
Copyright Delta UV
©
Page 4
IMPORTANT SAFETY INSTRUCTIONS
1. READ AND FOLLOW ALL INSTRUCTIONS
2. WARNING-
Never look at the ultraviolet lamps
when lit
. This may cause severe
injuries or burns and may even lead to loss of eyesight
3. WARNING –. Do not touch the ultraviolet lamp with bare hands, as these would leave
impurities that shorten the life of the lamp. If you do touch it: clean with alcohol or white
vinegar.
4. WARNING – Never unscrew the quartz tube sealing nut when the reactor is on load as
the quartz tube could be blown out of the reactor with force and injure you
5. WARNING – Do not use the reactor if the power supply wire is worn or damaged. In this
case it should be replaced.
6. WARNING – If the connecting cable between the reactor and the electrical cabinet is
damaged, it must be replaced by a special cable available as a spare part.
7. WARNING –
Even when stopped, power is present in the electrical unit
so make
sure that the main power supply upstream of the electrical cabinet is switched off before
carrying out any work on the equipment.
8. WARNING – To avoid electric short-circuits; do not place the electric wires or the reactor
in the pool water or in any other maintenance or cleaning fluid.
9. WARNING – Do not restart the system until the electric unit, the covers exterior elements
of the reactor are correctly back in place.
10. WARNING - Do not simply throw the old lamps into the trash as they contain Mercury
and must be disposed of properly.
www.lamprecycle.org
11. SAVE THESE INSTRUCTIONS
