ELP AM Series - Manual 20112 – 05/12
Copyright Delta-UV
©
Page 13
C.
STARTING UP
C.1 Starting the UV lamp
1
Check
that the electrical connection is compliant.
2
Check
that the top of the equipment is correctly positioned.
3
Switch on the reactor
4
Check
that the lamps are working properly: the indicator light for each lamp
should be lit
5
Check
that the hour counter is running
C.2 Calibration of the UV sensor
OPERATION for CALIBRATION
1. Turn on the on/off switch on the front of the electrical cabinet.
2. The UV C lamps will heat up to their maximum output level in 2 minutes (depending on
the temperature of the liquid being treated).
3.
Now you have to calibrate the sensor in its liquid environment
:
YOUR UV UNIT IS NOW DISINFECTING FOR THE INDICATED FLOW RATE A 100%.
