Delta Electronics VFD-VE, Руководство пользователя

Страница: 97 / 313

Chapter 4 Parameters
|
4-44 Revision Dec. 2008, 04VE, SW V2.05
Pr. Explanation Settings
Factory
Setting
VF VFPG SVC FOCPG TQCPG
0: Disable 0
○ ○ ○ ○
08-21
Tension Control
Selection
1: Tension closed-loop, speed mode
○ ○ ○ ○
2: Line speed closed-loop, speed mode
○ ○ ○ ○
3: Reserved
4: Tension open-loop, torque mode
○
08-22
Wind Mode 0: Rewind
1: Unwind 0
○ ○ ○ ○ ○
08-23
Mechanical Gear A
at Reel
1-65535 100
○ ○ ○ ○ ○
08-24
Mechanical Gear B
at Motor 1-65535 100
○ ○ ○ ○ ○
08-29
Proportional Gain 1
of Tension PID P
0.0~1000.0 50.0
○ ○ ○ ○
08-30
Integral Time of
Tension PID I 0.00~500.00 sec 1.00
○ ○ ○ ○
08-32
Proportional Gain 2
of Tension PID P 0.0~1000.0 50.0
○ ○ ○ ○
08-33
Integral Time 2 of
Tension PID I 0.00~500.00 sec 1.00
○ ○ ○ ○
08-36
Tension/Line Speed
PID Output Limit 0~100.00% 20.00
○ ○ ○ ○
08-40
Pulse Number for
Each Meter 0.0~6000.0 pulse/m 0.0
○ ○ ○ ○ ○
08-41
Current Line Speed 0.0~3000.0m/min 0.0
○ ○ ○ ○ ○
08-46
Initial Reel Diameter 0.0~6000.0mm 1.0
○ ○ ○ ○ ○
08-47
Initial Reel Diameter 1
0.0~6000.0mm
1.0
○ ○ ○ ○ ○
08-48
Initial Reel Diameter 2
0.0~6000.0mm
1.0
○ ○ ○ ○ ○
08-55
Smart Start Function 0: Disable
1: Enable
2: In unwind mode, rewind in reverse direction 1
○ ○ ○ ○
08-61
Allowance
Difference of Reel
Diameter of Broken
Belt Detection 1.0~6000.0mm 100.0
○ ○ ○ ○
08-64
Allowance Error
Detection Time of
Tension/Line Speed
PID Feedback 0.0~10.0 sec 0.5
○ ○ ○ ○
08-65
Error Treatment of
Tension/Line Speed
PID Feedback 0: Warn and keep operation
1: Warn and coast to stop
2: Warn and ramp to stop 0
○ ○ ○ ○
Group 9 Communication Parameters
Pr. Explanation Settings
Factory
Setting
VF VFPG SVC FOCPG TQCPG
09-22
Display Digital Value
of Analog Output 2 0~4095 Read-
only
○ ○ ○ ○ ○
09-23
Display Digital Value
of Analog Output 3 0~4095 Read-
only
○ ○ ○ ○ ○
Group 10 Speed Feedback Control Parameters
Pr. Explanation Settings
Factory
Setting
VF VFPG SVC FOCPG TQCPG
10-02
Encoder Feedback
Fault Treatment
0: Warn and keep operation
1: Warn and ramp to stop
2: Warn and coast to stop 2
○ ○ ○
10-03
Detection Time for
Encoder Feedback
Fault
0.00~10.0 sec 1.0
○ ○ ○
10-04
ASR (Auto Speed
Regulation) Control
( P) 1 0~40 10
○ ○ ○
10-05
ASR (Auto Speed
Regulation) Control (I) 0.000~10.000 sec 0.100
○ ○ ○
CALL NOW 800-985-6929 http://www.automatedpt.com
CALL NOW 800-985-6929 http://www.automatedpt.com