Delta Electronics DeviceNet Slave Communication Module IFD9502, Руководство по применению

Страница: 8 / 43

DeviceNet Slave Communication Module IFD9502
DVP-PLC Application Manual 6
z Note
The changed setting of communication mode is only valid when IFD9502 is re-powered. When
IFD9502 is operating, changing the setting of communication mode will be invalid.
3. Setting up baud rate
PIN 8 PIN 7 PIN 6 Baud rate of slave device
Off Off 125k bps
Off On 250k bps
On Off 500k bps
Reserved
On On Auto baud rate detection
z
Note:
The changed setting of the baud rate of DeviceNet is only valid when IFD9502 is re-powered. When
IFD9502 is operating, changing the baud rate will be invalid.
2.5 Communication ports on IFD9502
The communication ports on IFD9502 are used for the connection with
the equipment (Delta programmable logic controller, Delta AC motor
drive, Delta temperature controller, Delta servo drive, Delta human
machine interface and custom equipment).
PORT1 PORT2
1. PORT 1 PIN definition
PORT 1 sketch PIN Description
1 N.C.
2 GND
3 DATA-
4 DATA+
5 N.C.
1
2
3
4
5
6
PORT1
6 N.C.
z Note:
PORT 1 supports RS-485 communication only.
2. PORT 2 PIN definition
PORT 2 sketch PIN RS-232 RS-485
1 N.C. N.C.
2 RXD N.C.
3 TXD DATA-
4 N.C. N.C.
5 GND N.C.
6 N.C. N.C.
7 N.C. N.C.
8 N.C. DATA+
1
6
2
7
3
8
4
9
5
DB9 male
9 N.C. N.C.
z Note
PORT 2 supports RS-232 and RS-485 communication only.