Delta Electronics DeviceNet Slave Communication Module IFD9502, Руководство по применению

Страница: 27 / 43

DeviceNet Slave Communication Module IFD9502
DVP-PLC Application Manual 25
setting.
Instance2 EEPROM read/write:
Attribute ID (decimal) Access rule Name Default
30 Get/Set AMD reset parameter H’0000
71 Get/Set PLC reset parameter H’0000
90 Get/Set DTA reset parameter H’0000
150 Get/Set ASDA reset parameter H’0000
224 Get/Set DOP reset parameter H’0000
200 Get/Set Custom reset parameter H’0000
In the custom mode, if you are to return the I/O mapping of AC motor drive to default
setting, change Attribute30 of Instance2 of Class 0x9F into H’0001 and re-power IFD9502.
In the custom mode, if you are to return the I/O mapping of PLC to default setting,
change Attribute71 of Instance2 of Class 0x9F into H’0001 and re-power IFD9502.
In the custom mode, if you are to return the I/O mapping of temperature controller to
default setting, change Attribute90 of Instance2 of Class 0x9F into H’0001 and re-power
IFD9502.
In the custom mode, if you are to return the I/O mapping of servo drive to default
setting, change Attribute150 of Instance2 of Class 0x9F into H’0001 and re-power IFD9502.
In the custom mode, if you are to return the I/O mapping of HMI to default setting,
change Attribute224of Instance2 of Class 0x9F into H’0001 and re-power IFD9502.
In the custom mode, if you are to return the I/O mapping of the custom equipment to
default setting, change Attribute200 of Instance2 of Class 0x9F into H’0001 and re-power
IFD9502.
Common Services:
Implemented for
Service Code
Class Instance
Service name
005 Yes Yes Reset
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
Instance3 Modbus baud rate setting
Attribute ID
(decimal)
Access rule Name
Range
(Note 1)
Default value
(Note 1)
1 Get/Set AMD baud rate setting 1 ~ 2 2
2 Get/Set PLC baud rate setting 1 ~ 4 4
3 Get/Set DT baud rate setting 1 ~ 2 2
4 Get/Set ASDA baud rate setting 1 ~ 4 4
5 Get/Set DOP baud rate setting 1 ~ 4 4
6 Get/Set CUSTOM baud rate setting 1 ~ 4 1
Note 1: The baud rates of the codes are in the table below.