Dell S3048-ON, Руководство по настройке

Страница: 653 / 1036

Enabling Strict-Priority Queueing
In strict-priority queuing, the system de-queues all packets from the assigned queue before servicing any other queues. You can assign
strict-priority to one unicast queue, using the strict-priority command.
• Policy-based per-queue rate shaping is not supported on the queue configured for strict-priority queuing. To use queue-based rate-
shaping as well as strict-priority queuing at the same time on a queue, use the Scheduler Strict feature as described in Scheduler
Strict .
• The strict-priority supersedes bandwidth-percentage configuration.
• A queue with strict priority can starve other queues in the same port-pipe.
• Assign strict priority to one unicast queue.
INTERFACE mode
service-policy output policy-map-name
Enter the name for the policy map in character format (32 characters maximum).
Weighted Random Early Detection
Weighted random early detection (WRED) is a congestion avoidance mechanism that drops packets to prevent buffering resources from
being consumed.
The WRED congestion avoidance mechanism drops packets to prevent buffering resources from being consumed.
Traffic is a mixture of various kinds of packets. The rate at which some types of packets arrive might be greater than others. In this case,
the space on the buffer and traffic manager (BTM) (ingress or egress) can be consumed by only one or a few types of traffic, leaving no
space for other types. You can apply a WRED profile to a policy-map so that specified traffic can be prevented from consuming too much
of the BTM resources.
WRED uses a profile to specify minimum and maximum threshold values. The minimum threshold is the allotted buffer space for specified
traffic, for example, 1000KB on egress. If the 1000KB is consumed, packets are dropped randomly at an exponential rate until the maximum
threshold is reached (as shown in the following illustration); this procedure is the “early detection” part of WRED. If the maximum threshold,
for example, 2000KB, is reached, all incoming packets are dropped until the buffer space consumes less than 2000KB of the specified
traffic.
Quality of Service (QoS) 653