Dell S3048-ON Скачать руководство пользователя страница 343

Страница: 343 / 1036

Add Ranges

The following example shows how to use commas to add VLAN and port-channel interfaces to the range.

Example of Adding VLAN and Port-Channel Interface Ranges

Dell(config-if-range-gi-1/1-1/2)# interface range Vlan 2 – 100 , Port 1 – 25

Dell(config-if-range-gi-1/1-1/2-vl-2-100-po-1-25)# no shutdown

Defining Interface Range Macros

You can define an interface-range macro to automatically select a range of interfaces for configuration.
Before you can use the

macro

keyword in the

interface-range macro

command string, define the macro.

To define an interface-range macro, use the following command.

•

Defines the interface-range macro and saves it in the running configuration file.
CONFIGURATION mode

define

interface-range macro_name

{vlan

vlan_ID - vlan_ID

| {{gigabitethernet |

tengigabitethernet}

slot/port - slot/port

}} [ , {vlan

vlan_ID - vlan_ID

| {{gigabitethernet |

tengigabitethernet}

slot/port - slot/port

}]

Define the Interface Range

The following example shows how to define an interface-range macro named “test” to select Ten Gigabit Ethernet interfaces 5/1 through
5/4.

Example of the

define interface-range

Command for Macros

Dell(config)# define interface-range test gigabitethernet 5/1 - 5/4

Choosing an Interface-Range Macro

To use an interface-range macro, use the following command.

•

Selects the interfaces range to be configured using the values saved in a named interface-range macro.
CONFIGURATION mode

interface range macro

name

Example of Using a Macro to Change the Interface Range Configuration Mode

The following example shows how to change to the interface-range configuration mode using the interface-range macro named “test.”

Dell(config)# interface range macro test

Dell(config-if)#

Monitoring and Maintaining Interfaces

Monitor interface statistics with the

monitor interface

command. This command displays an ongoing list of the interface status (up/

down), number of packets, traffic statistics, and so on.
To view the interface’s statistics, use the following command.

•

View the interface’s statistics.
EXEC Privilege mode

Enter the type of interface and the interface information:

Interfaces

343

Содержание S3048-ON













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание S3048-ON

Отзывы:

Похожие инструкции для S3048-ON

Бренды по названию

Популярные бренды

Dell S3048-ON, Руководство по настройке

Результаты поиска

Содержание S3048-ON

Отзывы:

Похожие инструкции для S3048-ON

Бренды по названию

Популярные бренды