The following example configures object tracking on the reachability of an IPv6 route:
Dell(conf)#track 105 ipv6 route 1234::/64 reachability
Dell(conf-track-105)#delay down 5
Dell(conf-track-105)#description Headquarters
Dell(conf-track-105)#end
Dell#show track 105
Track 105
IPv6 route 1234::/64 reachability
Description: Headquarters
Reachability is Down (route not in route table)
2 changes, last change 00:03:03
Tracking a Metric Threshold
Use the following commands to configure object tracking on the metric threshold of an IPv4 or IPv6 route.
To remove object tracking, use the
no track
object-id
command.
1
(Optional) Reconfigure the default resolution value used by the specified protocol to scale the metric for IPv4 or IPv6 routes.
CONFIGURATION mode
track resolution {ip route | ipv6 route} {isis
resolution-value
| ospf
resolution-value
}
The range of resolution values is:
•
ISIS routes - 1 to 1000. The default is
1
.
•
OSPF routes - 1 to 1592. The efault is
1
.
2
Configure object tracking on the metric of an IPv4 or IPv6 route.
CONFIGURATION mode
track object-id {ip route
ip-address/prefix-len
| ipv6 route
ipv6-address/prefix-len
} metric
threshold [vrf
vrf-name
]
Valid object IDs are from 1 to 500.
Enter an IPv4 address in dotted decimal format. Valid IPv4 prefix lengths are from /0 to /32.
Enter an IPv6 address in X:X:X:X::X format. Valid IPv6 prefix lengths are from /0 to /128.
(Optional) E-Series only: For an IPv4 route, you can enter a VRF name.
3
(Optional) Configure the time delay used before communicating a change in the UP and/or DOWN status of a tracked route.
OBJECT TRACKING mode
delay {[up
seconds
] [down
seconds
]}
Valid delay times are from 0 to 180 seconds.
The default is
0
.
4
(Optional) Identify the tracked object with a text description.
OBJECT TRACKING mode
description
text
The text string can be up to 80 characters.
5
(Optional) Configure the metric threshold for the UP and/or DOWN routing status to be tracked for the specified route.
OBJECT TRACKING mode
536
Object Tracking
Содержание S3048-ON
