E0212
VOLT PLANAR
REG
System board is out of acceptable
voltage range; faulty or
improperly installed system board.
See "
Troubleshooting Power Supplies
" in "Troubleshooting
Your System."
E0276
CPU VRM
n
Specified microprocessor VRM is
faulty, unsupported, improperly
installed, or missing.
Ensure that supported VRMs of the same type are properly
installed. If the problem persists, replace the VRM (see
Figure 6-9
in "Installing System Options").
E0276
MISMATCH VRM
n
E0280
MISSING VRM
n
E0319
PCI OVER
CURRENT
Faulty or improperly installed
expansion card.
See "
Troubleshooting Expansion Cards
" in "Troubleshooting
Your System."
E0412
RPM FAN
n
Specified cooling fan is faulty,
improperly installed, or missing.
See "
Troubleshooting a Cooling Fan
" in "Troubleshooting
Your System."
E0780
MISSING CPU
1
Microprocessor is not installed in
socket 1.
Install a microprocessor in socket 1 (see "
Adding or
Replacing a Microprocessor
" in "Installing System Options").
To identify microprocessor socket 1, see
Figure A-3
.
E07F0
CPU IERR
Faulty or improperly installed
microprocessor.
See "
Troubleshooting a Microprocessor
" in "Troubleshooting
Your System."
E07F1
TEMP CPU
n
HOT
Specified microprocessor is out of
acceptable temperature range and
has halted operation.
See "
Troubleshooting System Cooling
" in "Troubleshooting
Your System." If the problem persists, ensure that the
microprocessor heat sinks are properly installed (see
"
Adding or Replacing a Microprocessor
" in "Installing System
Options").
E07F4
POST CACHE
Faulty or improperly installed
microprocessor.
See "
Troubleshooting a Microprocessor
" in "Troubleshooting
Your System."
E07F4
POST CPU REG
E07F4
POST CPU SMI
SMI handler failed to initialize;
faulty system board.
See "
Getting Help
."
E07FA
TEMP CPU
n
THERM
Specified microprocessor is out of
acceptable temperature range and
is operating at a reduced speed,
or frequency.
See "
Troubleshooting System Cooling
" in "Troubleshooting
Your System." If the problem persists, ensure that the
microprocessor heat sinks are properly installed (see
"
Adding or Replacing a Microprocessor
" in "Installing System
Options").
E0876
POWER PS
n
No power available from the
specified power supply; specified
power supply is improperly
installed or faulty.
See "
Troubleshooting Power Supplies
" in "Troubleshooting
Your System."
E0880
INSUFFICIENT
PS
Insufficient power is being
supplied to the system; power
supplies are improperly installed,
faulty, or missing.
See "
Troubleshooting Power Supplies
" in "Troubleshooting
Your System."
E0CB2
MEM SPARE
ROW
Correctable errors threshold was
met in a memory bank: errors
were remapped to the spare row.
See "
Troubleshooting System Memory
" in "Troubleshooting
Your System."
E0CF1
MBE DIMM
Bank
n
Memory modules installed in the
specified bank are not the same
type and size; faulty memory
module(s).
Ensure that all banks contain memory modules of the same
type and size and that they are properly installed. If the
problem persists, see "
Troubleshooting System Memory
" in
"Troubleshooting Your System."
E0CF1
POST MEM 64K
Parity failure in the first 64 KB of
main memory.
See "
Troubleshooting System Memory
" in "Troubleshooting
Your System."
E0CF1
POST NO
MEMORY
Main-memory refresh verification
failure.
Ensure that all banks contain memory modules of the same
type and size and that they are properly installed. If the
problem persists, see "
Troubleshooting System Memory
" in
"Troubleshooting Your System."
E0CF5
LOG DISABLE
SBE
Multiple single-bit errors on a
single memory module.
See "
Troubleshooting System Memory
" in "Troubleshooting
Your System."
E0D76
DRIVE FAIL
Faulty or improperly installed hard
drive or RAID controller.
See "
Troubleshooting Hard Drives
" and "
Troubleshooting a
RAID Controller Card
" in "Troubleshooting Your System."
Содержание PowerVault 775N
Страница 3: ...Back to Contents Page ...
Страница 65: ...Back to Contents Page ...
