Dell PowerEdge T110, Руководство владельца оборудования

Страница: 86 / 144

86
Installing System Components
CAUTION:
Never remove the heat sink from a processor unless you intend to
remove the processor. The heat sink is necessary to maintain proper thermal
conditions.
6
Using a #2 Phillips screwdriver, loosen one of the heat-sink retention
screws. See Figure 3-15.
7
Wait 30 seconds for the heat sink to loosen from the processor.
8
Repeat step 6 and step 7 to loosen the other three heat-sink retention
screws.
9
Gently lift the heat sink off of the processor and set the heat sink aside
upside down (thermal grease side facing up).
Figure 3-15. Installing and Removing the Heat Sink
CAUTION:
The processor is held in its socket under strong pressure. Be aware
that the release lever can spring up suddenly if not firmly grasped.
1 heat sink 2 heat sink retention screws (4)
1
2
Mayzie_HOM.book Page 86 Monday, August 31, 2009 9:33 PM