manualshive.com logo in svg

Dell PowerEdge R630, Руководство пользователя

Поделиться
Скачать
Dell PowerEdge R630 Скачать руководство пользователя страница 26

uSATA SSD indicator codes

Figure 9. uSATA SSD indicators

1.

uSATA SSD activity indicator 

2.

uSATA SSD status indicator 

3.

uSATA SSD

NOTE: If the SSD is in the Advanced Host Controller Interface (AHCI) mode, the status indicator (on 
the right side) does not function and remains off.

Table 9. Drive status indicator codes

Drive-status indicator pattern

Condition

Flashes green twice per second

Identifying drive or preparing for removal.

Off

Drive ready for insertion or removal.

NOTE: The drive status indicator remains off until 
all hard drives are initialized after the system is 
turned on. Drives are not ready for insertion or 
removal during this time.

Flashes green, amber, and turns off

Predicted drive failure

Flashes amber four times per second

Drive failed

Steady green

Drive online

Flashes green for three seconds, amber for 
three seconds, and turns off after six seconds

Rebuild aborted

26

Содержание PowerEdge R630
















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды