manualshive.com logo in svg

Dell PowerEdge R630, Руководство пользователя

Поделиться
Скачать
Dell PowerEdge R630 Скачать руководство пользователя страница 203

2.

Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.

3.

Remove the system cover.

4.

Verify that the installed expansion cards are compliant with the expansion card installation 

guidelines.

5.

Ensure that each expansion card is firmly seated in its connector.

6.

Install the system cover.

7.

Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.

8.

If the problem is not resolved, turn off the system and attached peripherals, and disconnect the 

system from the electrical outlet.

9.

Remove the system cover.

10. Remove all expansion cards installed in the system.
11. Install the system cover.
12. Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.
13. Run the appropriate diagnostic test. See the Using system diagnostics section. If the tests fail, see the 

Getting help section.

14. For each expansion card you removed in step 10, perform the following steps:

a.

Turn off the system and attached peripherals, and disconnect the system from the electrical 

outlet.

b.

Remove the system cover.

c.

Reinstall one of the expansion cards.

d.

Install the system cover.

e.

Run the appropriate diagnostic test. See the Using system diagnostics section.

If the problem persists, see the Getting help section.

Related Links

Getting help
Using system diagnostics
Removing the system cover
Installing the system cover
Removing an expansion card
Installing an expansion card

Troubleshooting expansion cards

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only 

perform troubleshooting and simple repairs as authorized in your product documentation, or as 

directed by the online or telephone service and support team. Damage due to servicing that is 

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions 
that are shipped with your product.

NOTE: When troubleshooting an expansion card, you also have to see the documentation for your 
operating system and the expansion card.

Steps
1.

Run the appropriate diagnostic test. See the Using system diagnostics section.

2.

Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.

203

Содержание PowerEdge R630
















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды