manualshive.com logo in svg

Dell PowerEdge R630, Руководство пользователя

Поделиться
Скачать
Dell PowerEdge R630 Скачать руководство пользователя страница 172

Figure 95. Removing the VGA Module

1.

screw

2. VGA module cable

3. VGA module

4. control panel

Related Links

Safety instructions
Before working inside your system
Removing the control panel–10 hard drive and 24 hard drive system
Removing the control panel–eight hard drive system
Installing the VGA module
Safety instructions

Installing the VGA module

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only 

perform troubleshooting and simple repairs as authorized in your product documentation, or as 

directed by the online or telephone service and support team. Damage due to servicing that is 

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions 

that are shipped with your product.

NOTE: This procedure applies only to the eight hard drive system.

1.

Follow the safety guidelines listed in the Safety instructions section.

2.

Keep the Philips #2 screwdriver ready.

172

Содержание PowerEdge R630
















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды