manualshive.com logo in svg

Dell PowerEdge R630, Руководство пользователя

Поделиться
Скачать
Dell PowerEdge R630 Скачать руководство пользователя страница 145

Removing an AC power supply unit

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only 
perform troubleshooting and simple repairs as authorized in your product documentation, or as 
directed by the online or telephone service and support team. Damage due to servicing that is 
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions 

that are shipped with your product.

CAUTION: The system needs one power supply for normal operation. On power-redundant 
systems, remove and replace only one power supply at a time in a system that is powered on.

NOTE: You may have to unlatch and lift the optional cable management arm if it interferes with the 

power supply unit (PSU) removal. For information about the cable management arm, see the 

system’s rack documentation.

Steps
1.

Disconnect the power cable from the power source and from the PSU you intend to remove, and 

then remove the cables from the strap.

2.

Press the release latch and slide the PSU out of the chassis by using the PSU handle.

Figure 70. Removing an AC PSU

1.

release latch

2. PSU cable connector

3. PSU

4. power connector

5. PSU handle

Related Links

Installing an AC power supply unit

145

Содержание PowerEdge R630
















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды