Dell PowerConnect J-SRX240, Руководство по оборудованию

Страница: 70 / 160

6.
Install the second screw in each mounting bracket.
7.
Verify that the mounting screws on one side of the rack are aligned with the mounting
screws on the opposite side and that the device is level.
Related Topics Preparing the J-SRX240 Services Gateway for Installation on page 51
•
•
Required Tools and Parts for Installing and Maintaining the J-SRX240 Services Gateway
on page 45
•
J-SRX240 Services Gateway Installation Safety Guidelines and Warnings on page 106
Replacing or Installing Mini-Physical Interface Modules in the J-SRX240 Services
Gateway
Mini-Physical Interface Modules (Mini-PIMs) are circuit boards that you can install in a
device for enhanced functionality based on your requirements. They enable you to easily
add or change physical interfaces on a device.
The Mini-Physical Interface Module (Mini-PIM) slot is covered with a blank faceplate to
maintain proper airflow through the services gateway. Before installing the Mini-PIM, you
must remove the faceplate.
See the PowerConnect J-SRX Series Services Gateways for the Branch Physical Interface
Modules Hardware Guide for information about installing the Mini-PIMs.
NOTE: The Mini-PIMs available on the J-SRX240 Services Gateway are not
hot-swappable. You need to power off the device before removing or installing Mini-PIMs.
Related Topics
•
J-SRX240 Services Gateway Installation Safety Guidelines and Warnings on page 106
•
Required Tools and Parts for Installing and Maintaining the J-SRX240 Services Gateway
on page 45
•
Installing the J-SRX240 Services Gateway on page 52
54
PowerConnect J-SRX240 Services Gateway Hardware Guide