Dell PowerConnect J-SRX240, Руководство по оборудованию

Страница: 32 / 160

Table 10: J-SRX240 Services Gateway Front Panel Components (continued)
Usage Description Component
The HA LED can be used to determine if the
chassis clustering is enabled on the device. The HA LED has the following indicator colors:
• Green and steadily on indicates that all HA
links are available.
• Red and steadily on indicates that the HA
links are not working as expected.
• Amber and steadily on indicates that some
HA links are not working as expected.
• Off indicates that HA is not enabled.
HA LED
The Mini-PIM LED can be used to determine if
the Mini-PIM is present and detected by the
device. Each Mini-Physical Interface Module (Mini-PIM)
LED has the following indicator colors:
•
Green and steadily on indicates that the
Mini-PIM is functioning normally.
• Off indicates that the Mini-PIM is not present
or not detected by the device.
Mini-PIM LED
Ethernet Port LEDs
On the J-SRX240 Services Gateway, each Gigabit Ethernet port has the two LEDs as
shown in Figure 7 on page 16.
Figure 7: J-SRX240 Services Gateway Port LEDs
Table 11: J-SRX240 Services Gateway Port LEDs
LED Number
PoE (Power over Ethernet) LED 1
TX/RX/Link LED 2
NOTE: The PoE LED is enabled only on the PoE variant of the J-SRX240 Services
Gateway. For non-PoE services gateways, the PoE LED remains off.
16
PowerConnect J-SRX240 Services Gateway Hardware Guide