Dell PowerConnect J-SRX240, Руководство по оборудованию

Страница: 54 / 160

Table 18: Site Preparation Checklist for Services Gateway Installation (continued)
Date and Notes Additional Information Item or Task
Rack Installation
“J-SRX240 Services Gateway Rack
Requirements” on page 39 • Verify that your rack meets the
minimum requirements.
• Plan the rack location, including
required space clearances.
• Secure the rack to the floor and the
building structure.
Cables
“Interface Cable and Wire Specifications for the
J-SRX240 Services Gateway” on page 127 • Acquire cables and connectors.
•
Review the maximum distance allowed
for each cable. Choose the length of
cable based on the distance between
the hardware components being
connected.
• Plan the cable routing and
management.
Related Topics J-SRX240 Services Gateway Specifications on page 7
•
•
J-SRX240 Services Gateway Site Electrical Wiring Guidelines on page 123
•
J-SRX240 Services Gateway Rack Requirements on page 39
•
Clearance Requirements for Airflow and Hardware Maintenance of the J-SRX240
Services Gateway on page 40
•
Interface Cable and Wire Specifications for the J-SRX240 Services Gateway on page 127
•
General Site Guidelines for Installing the J-SRX240 Services Gateway on page 38
General Site Guidelines for Installing the J-SRX240 Services Gateway
The following precautions help you plan an acceptable operating environment for your
J-SRX240 Services Gateway and avoid environmentally caused equipment failures:
•
For the cooling system to function properly, the airflow around the chassis must be
unrestricted. Allow sufficient clearance between the front and back of the chassis and
adjacent equipment. Ensure that there is adequate circulation in the installation location.
•
Follow the ESD procedures to avoid damaging equipment. Static discharge can cause
components to fail completely or intermittently over time.
38
PowerConnect J-SRX240 Services Gateway Hardware Guide