Dell PowerConnect J-SRX240, Руководство по оборудованию

Страница: 86 / 160

1.
Connect a modem at your remote location to a management device such as a PC
or laptop computer.
2.
Start your asynchronous terminal emulation application (such as Microsoft Windows
HyperTerminal) on the PC or laptop computer.
3.
Select the
COM
port to which the modem is connected (for example,
COM1
).
4.
Configure the port settings shown in Table 29 on page 70.
Table 29: Port Settings for Connecting CLI at User End
Value Port Settings
9600 Bits per second
8 Data bits
None Parity
1 Stop bits
None Flow control
5.
In the HyperTerminal window, enter
AT
.
For more information on the AT commands, see the JUNOS Software Administration
Guide .
An OK response verifies that the modem can communicate successfully with the
COM port on the PC or laptop.
6.
Dial the modem that is connected to the console port on the services gateway by
entering
ATDT remote-modem-number . For example, if the number of the modem
connected to the console port on the services gateway is 0013033033030 , enter
ATDT 0013033033030
.
The services gateway login prompt appears.
7.
Log in as the user
root
. No password is required at initial connection, but you must
assign a root password before committing any configuration settings.
Related Topics
•
Connecting the J-SRX240 Services Gateway to the J-Web Interface on page 63
•
Connecting the J-SRX240 Services Gateway to the CLI on page 66
•
Connecting to the CLI at the User End for the J-SRX240 Services Gateway on page 69
•
Connecting the Modem at the J-SRX240 Services Gateway End on page 68
•
Connecting the Modem to the Console Port on the J-SRX240 Services Gateway on
page 69
70
PowerConnect J-SRX240 Services Gateway Hardware Guide