Dell PowerConnect J-SRX210, Руководство по оборудованию

Страница: 79 / 182

•
Preparing the J-SRX210 Services Gateway for Rack-Mount, Desk-Mount, and
Wall-Mount Installation on page 61
•
Preparing the J-SRX210 Services Gateway for Desk-Mount Installation on page 63
•
Preparing the J-SRX210 Services Gateway for Wall-Mount Installation on page 64
Preparing the J-SRX210 Services Gateway for Desk-Mount Installation
You can mount a J-SRX210 Services Gateway on a desk or other level surface horizontally
or vertically. The four rubber feet attached to the chassis provide stability.
Table 28 on page 63 provides the list of tasks you need to perform before installing the
device.
Table 28: J-SRX210 Services Gateway Preinstallation Checklist for
Desk-Mount Installation
Additional Information Task
“Site Preparation Checklist for the
J-SRX210 Services Gateway” on page 45 Verify that the site meets the requirements.
“Clearance Requirements for Airflow and
Hardware Maintenance of the J-SRX210
Services Gateway” on page 50 Place the desk in its permanent location, allowing
adequate clearance for airflow and maintenance,
and secure it to the building structure.
“Unpacking the J-SRX210 Services
Gateway” on page 57 Remove the services gateway chassis from the
shipping carton.
Verify that you have the following parts available in
your desk-mounting kit to mount the J-SRX210
Services Gateway vertically:
• Vertical stand
•
Screws
NOTE: If you are mounting the services gateway horizontally on a desk, ensure that the
chassis is attached with the rubber feet.
NOTE: The vertical desk-mounting kit is not shipped with the device and must be
ordered separately.
Related Topics Site Preparation Checklist for the J-SRX210 Services Gateway on page 45
•
•
Clearance Requirements for Airflow and Hardware Maintenance of the J-SRX210
Services Gateway on page 50
•
Unpacking the J-SRX210 Services Gateway on page 57
63
Chapter 11: Preparing the J-SRX210 Services Gateway for Installation