Dell PowerConnect J-SRX210, Руководство по оборудованию

Страница: 127 / 182

Table 41: Component LEDs on the Services Gateway (continued)
Possible Causes and Corrective
Actions
Meaning State LED
Normal condition. No action is
required. The Mini-PIM is present and detected
by the device. Green Mini-PIM LED
See the “Monitoring the Services
Gateway Using Chassis Alarm
Conditions” topic under Related
Topics. The Mini-PIM is not present or is not
detected by the device. Off
Normal condition. No action is
required. The port is inactive. Off Voice Interface LED
Normal condition. No action is
required. The port is active and functioning
normally. Green (Steady)
Normal condition. No action is
required. The port is active and not ready for
data communication. Amber
Normal condition. No action is
required. The port is active and data
communication is taking place. Green (Blinking)
Normal condition. No action is
required. The port is initializing.
NOTE: The Voice Interface port LED
glows red (blinking) while initializing.
If there is an error, the LED remains red;
otherwise, the LED changes to green.
Red (blinking)
contact Dell Support. See ““Dell
Support”” on page 115. The Port has detected a hardware
initialization failure. Red (steady)
Related Topics Monitoring the J-SRX210 Services Gateway Chassis Using the CLI on page 107
•
•
Monitoring the J-SRX210 Services Gateway Using Chassis Alarm Conditions on page 111
•
Monitoring the J-SRX210 Services Gateway Power System on page 113
•
Using the Reset Config Button on the J-SRX210 Services Gateway on page 114
•
Changing the Reset Config Button Behavior on the J-SRX210 Services Gateway on
page 114
•
Dell Support on page 115
Monitoring the J-SRX210 Services Gateway Using Chassis Alarm Conditions
When the services gateway detects an alarm condition, the alarm LED on the front panel
turns red or amber as appropriate.
To view a more detailed description of the cause of the alarm , issue the
show chassis
alarms
CLI command.
111
Chapter 18: Monitoring the J-SRX210 Services Gateway