Installing the cover
1.
Place the cover on the computer and slide the cover until it clicks into place.
2.
Follow the procedure in
After Working Inside Your Computer
Removing the front bezel
1.
Follow the procedure in
Before Working Inside Your Computer
.
2.
Remove the
cover
.
3.
To remove the front bezel:
a. Lift the tabs to release the front bezel from the computer [1].
b. Remove the front bezel from the computer [2].
Installing the front bezel
1.
Insert the tabs on the bezel into the slots on the computer.
2.
Press the bezel until the tabs clicks into place.
3.
Install the
cover
.
4.
Follow the procedure in
After Working Inside Your Computer
Removing the fan duct
1.
Follow the procedure in
Before Working Inside Your Computer
.
2.
Remove the
cover
.
3.
To remove the fan duct:
a. Holding the touch points, pull the fan duct bracket to release the fan duct [1].
b. Lift the fan duct away from the computer [2].
9
Содержание OptiPlex 7040
Страница 1: ...OptiPlex 7040 Small Form Factor Owner s Manual Regulatory Model D11S Regulatory Type D11S001 ...
Страница 7: ...5 If required verify that the computer works correctly by running Dell Diagnostics 7 ...
Страница 30: ...29 Internal USB connector 30 SATA1 connector 31 Coin cell battery 30 ...
