Installing the system fan
1.
Place the system fan in the computer.
2.
Pass the grommets through the chassis and slide outward along the groove to secure it in place.
3.
Connect the system fan cable to the system board.
4.
Install the:
a.
optical drive
b.
hard drive assembly
c.
front bezel
d.
cover
5.
Follow the procedure in
After Working Inside Your Computer
.
Removing the heat sink assembly
1.
Follow the procedure in
Before Working Inside Your Computer
.
2.
Remove the:
a.
cover
b.
front bezel
c.
fan duct
d.
hard drive assembly
e.
optical drive
3.
To remove the heat sink assembly:
a. Disconnect the heat sink cable from the system board. [1]
b. Loosen the captive screws that secure the heat sink assembly and lift it away from the computer
[2] [3].
17
Содержание OptiPlex 7040
Страница 1: ...OptiPlex 7040 Small Form Factor Owner s Manual Regulatory Model D11S Regulatory Type D11S001 ...
Страница 7: ...5 If required verify that the computer works correctly by running Dell Diagnostics 7 ...
Страница 30: ...29 Internal USB connector 30 SATA1 connector 31 Coin cell battery 30 ...
