Installing the heat sink assembly
1.
Place the heat sink assembly onto the processor.
2.
Tighten the captive screws to secure the heat sink assembly to the system board.
3.
Connect the heat sink cable to the system board.
4.
Install the:
a.
fan duct
b.
optical drive
c.
hard drive assembly
d.
front bezel
e.
cover
5.
Follow the procedure in
After Working Inside Your Computer
.
Removing the processor
1.
Follow the procedure in
Before Working Inside Your Computer
.
2.
Remove the:
a.
cover
b.
front bezel
c.
hard drive assembly
d.
optical drive
e.
fan duct
f.
heat sink
3.
To remove the processor:
a. Release the socket lever by pushing the lever down and out from under the tab on the processor
shield [1].
b. Lift the lever upward and lift the processor shield [2].
c. Lift the processor out of the socket [3].
18
Содержание OptiPlex 7040
Страница 1: ...OptiPlex 7040 Small Form Factor Owner s Manual Regulatory Model D11S Regulatory Type D11S001 ...
Страница 7: ...5 If required verify that the computer works correctly by running Dell Diagnostics 7 ...
Страница 30: ...29 Internal USB connector 30 SATA1 connector 31 Coin cell battery 30 ...
