Dell Networking 7048, Справочное руководство

Страница: 252 / 1788

252
AAA Commands
Command Mode
Global Configuration mode
User Guidelines
The default and optional list names created with the aaa authentication
login command are used with the login authentication command. Create a
list by entering the aaa authentication login
list-name method
command for
a particular protocol, where
list-name
is any character string used to name
this list. The
method
argument identifies the list of methods that the
authentication algorithm tries, in the given sequence.
The additional methods of authentication are attempted only if the previous
method returns an error, not if there is an authentication failure. Only the
RADIUS, , local and enable methods can return an error. To
ensure that authentication succeeds even if all methods return an error,
specify none as the final method in the command line. For example, if none is
specified as an authentication method after radius , no authentication is used
if the RADIUS server is down. If specified, none must be the last method in
the list.
NOTE: Auth-Type:=Local doesn’t work for recent versions of FreeRadius.
FreeRadius ignores the configuration if Local is used. Administrators should remove
Auth-Type=Local
and use the PAP or CHAP modules instead.
Example
The following example configures the default authentication login to attempt
RADIUS authentication, then local authentication, then enable
authentication, and then, if all the previous methods returned an error, allow
the user access (none method).
console(config)# aaa authentication login default
radius local enable none
aaa authorization
Use the aaa authorization command to create an authorization method list.
A list may be identified by a user-specified list-name or the keyword default .
Use the no form of the command to delete an authorization list.
2CSPC4.X7000-SWUM204.book Page 252 Friday, March 15, 2013 8:22 AM