Dell Networking 7048, Справочное руководство

Страница: 870 / 1788

870
802.1x Commands
dot1x timeout quiet-period
Use the dot1x timeout quiet-period command in Interface Configuration
mode to set the number of seconds that the switch remains in the quiet state
following a failed authentication exchange (for example, the client provided
an invalid password). To return to the default setting, use the no form of this
command.
Syntax
dot1x timeout quiet-period
seconds
no dot1x timeout quiet-period
•
seconds —
Time in seconds that the switch remains in the quiet state
following a failed authentication exchange with the client. (Range:
0–65535 seconds)
Default Configuration
The switch remains in the quiet state for 60 seconds.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
During the quiet period, the switch does not accept or initiate any
authentication requests.
Change the default value of this command only to adjust for unusual
circumstances, such as unreliable links or specific behavioral problems with
certain clients and authentication servers.
To provide a faster response time to the user, enter a smaller number than the
default.
Example
The following example sets the number of seconds that the switch remains in
the quiet state following a failed authentication exchange to 3600.
console(config)# interface gigabitethernet 1/0/16
console(config-if-1/0/16)# dot1x timeout quiet-period 3600
2CSPC4.X7000-SWUM204.book Page 870 Friday, March 15, 2013 8:22 AM