Dell Networking 7048, Справочное руководство

Страница: 1044 / 1788

1044
IPv6 PIM Commands
Default Configuration
The default threshold is 0. This indicates that the register limit is infinite.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pim register-rate-limit 10
ipv6 pim rp-address
Use the ipv6 pim rp-address command to define the address of a PIM
Rendezvous Point (RP) for a specific multicast group range. Use the no form
of this command to remove a configured RP.
Syntax
ipv6 pim rp-address {
rp-address group-address group-mask
[ override ]}
no ipv6 pim rp-address {
rp-address group-address group-mask}
Parameter Description
Default Configuration
None - There are no static multicast groups configured for an RP.
Parameter Description
rp-address
The valid IPv6 address for the Rendezvous Point.
group-address
A valid multicast group address to be sourced from the
Rendezvous Point.
group-mask A mask indicating the range of multicast groups sourced from
the RP.
override A flag indicating that a static entry should override dynamically
learned entries for the configured multicast group.
2CSPC4.X7000-SWUM204.book Page 1044 Friday, March 15, 2013 8:22 AM