Dell Networking 7048, Справочное руководство

Страница: 1085 / 1788

IPv6 Routing Commands
1085
The long form of the command includes the same annotations and shows
whether address autoconfiguration or DHCP client are enabled on the
interface. When the interface acts as a host interface, the output also shows
the default gateway on the interface, if one exists.
Examples
The following example shows the method of assignment for each IPv6 address
that is either autoconfigured or leased from a DHCP server.
console#show ipv6 interface
Oper.
Interface Mode IPv6 Address/Length
---------- -------- ---------------------------------
Vl3 Enabled FE80::211:88FF:FE2A:3E3C/128
2033::211:88FF:FE2A:3E3C/64
Vl5 Enabled FE80::211:88FF:FE2A:3E3C/128
2017::A42A:26DB:1049:43DD/128 [DHCP]
Vl7 Enabled FE80::211:88FF:FE2A:3E3C/128
2001::211:88FF:FE2A:3E3C/64 [AUTO]
Vl9 Disabled FE80::211:88FF:FE2A:3E3C/128 [TENT]
The Method column shows one of the following values:
• Auto – The IPv6 address was automatically generated using IPv6 auto
address configuration (RFC 2462)
• Config – The IPv6 address was manually configured.
• DHCP – The IPv6 address was leased from a DHCP server.
• TENT – Tentative address.
The following example displays the long form of the command, and indicates
whether address autoconfiguration or DHCP client are enabled on the
interface. When the interface acts as a host interface, the output also shows
the default gateway on the interface, if one exists.
TENT Tentative address.
Field Description
2CSPC4.X7000-SWUM204.book Page 1085 Friday, March 15, 2013 8:22 AM