Dell Networking 7048, Справочное руководство

Страница: 673 / 1788

QoS Commands
673
Parameter Description
Default Configuration
WRED queue management policy is disabled by default. Tail-drop queue
management policy is enabled by default. The threshold for invoking tail-
drop behavior when WRED is disabled is approximately 1/2 of the remaining
free packet buffer in the switch.
Command Mode
Interface Configuration (physical or port-channel) mode or Global
Configuration mode
User Guidelines
When used on a port-channel, this command will override the settings on the
individual interfaces that are part of the port channel. Removing an interface
from the port channel restores the individual interface settings.
This command can be used in Interface Range mode.
Use the
cos-queue min-bandwidth command to configure the minimum
bandwidth percentage guarantee for the CoS queues.
Use the
show interfaces random-detect command to display the WRED
configuration.
Use the
policy-map and conform-color commands to mark traffic with a color
other than default green color.
The drop probability scale supports values in the range 0-10% and the discrete
values 25%, 50%, 75%, and 100%. Other values are truncated to the next lower
value by the hardware.
Parameter Description
queue-id An integer indicating the queue-id which is to be enabled for
WRED. Range 0-6. Up to 7 queues may be simultaneously
specified.
2CSPC4.X7000-SWUM204.book Page 673 Friday, March 15, 2013 8:22 AM