Dell Networking 7048, Справочное руководство

Страница: 644 / 1788

644
Port Channel Commands
User Guidelines
For a LAG that contains links distributed across stacking units, the default
behavior is to distribute locally received ingress traffic across all LAG links in
the stack per the selected hashing algorithm. When enabled, this command
disables forwarding of ingress unicast traffic across stacking links for a LAG
that is comprised of links on multiple stack units. It does this by restricting
LAG hashing to only select egress links on the stack unit where the traffic
ingresses.
CAUTION:
If the capacity of the local egress LAG links is exceeded, traffic will
be discarded. Therefore, use of this option should be carefully considered, and the
operator must ensure that sufficient egress bandwidth is available in the LAG links
on every stack member to avoid excessive discards.
By default, the local-preference mode for a port-channel is disabled. This
command can be used only on port-channel interfaces.
port-channel min-links
Use the port-channel min-links command in Interface Configuration (port-
channel) mode to set the minimum number of links that must be up in order
for the port channel interface to be declared up. Use the no form of the
command to return the configuration to the default value (1).
Syntax
port-channel min-links
1-8
no port-channel min-links
Parameter Description
Default Configuration
This command has no default configuration.
Parameter Description
min-links The minimum number of links that must be active before the
link is declared up. Range 1-8. The default is 1.
2CSPC4.X7000-SWUM204.book Page 644 Friday, March 15, 2013 8:22 AM